Supercover White 250ml
Supercover/ Opaque ink for black and dark colours.
or 4 payments of $3.46 with InfoIn Stock
Supercover inks do not require a base coat, or two layer printing, provided the inks are printed off contact/ elevated, to allow for solid ink flow. The ink contains much more pigment and a thicker base, if you print directly the screen will block up with ink and you'll receive a patchy print. Elevated printing is a simple process, with instructions available to hep you.
Aquatex is a professional grade ink used by professional trade printers and crafters alike. A suitable substitute to Permaset Aqua fabric inks.
▪ 100% water based for easy clean up, with colours fully inter mixable
▪ Trade quality pigments provide permanent, waterproof & dry cleanable prints
▪ Prints 100% cotton AND 100% polyester without fixing additives
▪ Easy to print, long screen drying time with professional results
▪ Australian made, environmentally friendly formula tested to AS/NZ 8124.3
Supercover bases should be printed off contact/ elevated to provide a solid print coverage - details . .
Retarder Ink Additive may be required to thin ink and prolong drying time in screen.
Colour swatch sample is printed onto cotton fabric to provide an accurate result of the final colour of the product. The colour of your fabric may affect the final colour where no base coat is printed, or insufficient coverage has been applied.
Colour variations may occur due to minor variations in computer monitor/ display colour profiles. Supercover swatch displayed may standard pigment with black background to differentiate a supercover ink, however final print result will be similar to colour displayed once heat set.
No base coat required
Waterbased - easy use and clean-up
Professional quality results
Suitable for 100% Cotton to 100% Polyester
Fabric ink also suitable for printing onto canvas, paper, wood and other absorbent materials.
Heat setting required
Activewear/ nylon/ elastane require Air Cure additive, as materials are unsuitable for heat setting.
Trade quality pigments - dry cleanable
Similar substitute for Permaset Aqua colour Supercover White
Container: Jar with resealable lid
- Supercover ink, also called 'Opaque ink', is suitable for printing all colours.
- Print onto both white and black, plus all colours in between, with one ink.
- Print off contact by elevating screen for solid prints - details . .
- Retarder Ink Additive may be required to thin ink and prolong drying time in screen.
- Where item can not be heat set Air Cure Additive should be used.
|Unit Of Measure||ml|
|Type||Supercover ink for black/ dark t-shirts & materials|
|Format||Jar with resealable lid|
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure and for compensation for any other reasonable foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
All care has been taken to reproduce the colour swatch accurately for your review, however due to colour variations on computer monitors, printed colour may vary from that depicted online. Your material/ fabric may also affect printed colour.
Should you receive a product that does not meet your expectations, you may return it for a refund or exchange - prior to opening the product. Our normal Sale Terms apply to all returns.
Where products have been opened/used, suitability of usage has been determined to have occurred with no refund available for change of mind purchases on used products. This does not exclude warranty claims where opened ink products may be faulty or contain a manufacturing fault.
Something not right with your ink? Need to make a warranty claim? Visit the Warranty Support section so we may assist you promptly.