12mm Frame Mounting Double Sided Tape | Attach SPO Film to frames to tension for screen printing and printing applications
Double sided tissue tape to tension SPO Film to frames
Standard 12mm tape is recommended for SPO Film for strong hold, yet will not tear when removing the screen.
Apply to both plastic and metal frames (or your own custom wood, etc).
Supplied pre-taped onto:
- Small Plastic Frame (Code S-9100)
- Large Plastic Frame (Code S-9101)
- Small Metal Frame (Code S-9102)
- Large Metal Frame (Code S-9103)
MiScreen Digitial & GOCCOPRO QS Mesh
The polyester requires a higher adhesion that 12mm, we recommend 18mm Tissue Tape at a minimum, or for ultra adhesion use 12mm Red MaxiBond Tape (Code: T-R12)
Type: Double sided tissue tape with a high strength acrylic adhesive.
Length: 50 Metres
Colour: Clear tape with a white release liner.
(Formerly product code: N-190)
|Unit Of Measure||ea|
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Should you receive a product that does not meet your expectations, you may return it for a refund or exchange - prior to opening or using the product.
Where products have been opened or used, suitability of usage has been determined and no refund is available for change of mind purchases on used products. This does not exclude warranty claims where product may be faulty or contain a manufacturing fault. Further support available in the Warranty Support section of this website.